Product was successfully added to your shopping cart.

Thiết bị Smart IO công nghiệp Model: ioMirror E3210 Moxa Việt Nam, Moxa ViệtNam

0 Review(s)

Quick Overview

Model: ioMirror E3210
Xuất xứ: Taiwan
Nhà cung cấp: STC Việt Nam
Hãng sản xuất: MOXA

Tình trạng: Có sẵn

Regular Price:

Special Price Liên Hệ: 0918 364 352

Liên hệ Tư vấn

Mr Duy
0918 364 352

Qty:

Chi tiết

Features and Benefits

Direct input-to-output signal communication over IP
High-speed peer-to-peer I/O within 20 ms
One physical alarm port for connectivity status
Utility for quick and easy web-based settings
Local alarm channel
Remote alarm message
Supports Modbus TCP for remote monitoring
Optional LCD module for easy configuration

Introduction

The ioMirror E3200 Series, which is designed as a cable-replacement solution to connect remote digital input signals to output signals over an IP network, provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3200 Series device, or can be sent to a local PLC or DCS controller. Over a local area network, the ioMirror can achieve a low signal latency (typically less than 20 ms). With the ioMirror, remote sensors can be connected to local controllers or display panels over copper, fiber, or wireless Ethernet infrastructures, and signals can be transmitted over virtually unlimited distances, without noise problems.

Split Sensor Signals to 16 Different Locations

The ioMirror E3200 Series can split one input signal to two digital output channels at two different IP addresses. Eight tank level signals can be monitored at 16 different display panels, all at the same time.

Local Alarm and Remote Alarm Messages for Monitoring Connectivity

The ioMirror E3200 Series has a 24 VDC alarm output channel that can activate an attached buzzer or LED display when the connection fails. In addition, both ioMirror modules can send messages to the ioEventLog software, ensuring that at least one of the warning messages will reach the ioEventLog software.