Liên hệ ngay: 0918 364 352 để nhận được báo giá tốt nhất
   Ứng dụng:
             * Giàn Khoan
             * Nhà máy hóa chất
             * Kho chứa xăng dầu, chất dễ cháy nổ
             * Trạm vận chuyển khí hóa lỏng
Giới thiệu:
Sierra Monitor từ Quasar 900, do Spectrex sản xuất, là một hệ thống phát hiện khí đường mở, cung cấp khả năng 
giám sát liên tục các khí hydrocarbon dễ cháy như Methane và Propane. Quasar 900 bao gồm một máy phát hồng 
ngoại Xenon Flash và máy thu hồng ngoại, khoản cách từmáy phát đến thu từ 23 ft. (7 m) đến 650 ft. (200 m). 
STT Mô tả Hãng Giá
1 Model: 904
Open Path Gas Xenon Flash 80-200 M Quasar 900 Series
Includes transmitter, receiver, and two
tilt mounts
MSA-SierraMonitor Vietnam Liên hệ ngay            0918 364 352
2 Model: 799225
Pole Mount (U-bolt 5"), Quasar 900 Series
MSA-SierraMonitor Vietnam
3 Model: 888263
Sunshade, Quasar 900 Series
MSA-SierraMonitor Vietnam
4 Model: 888247
Commissioning Kit, Quasar 900 Series
MSA-SierraMonitor Vietnam

Sử dụng kỹ thuật Quang phổ hấp thụ quang học vi sai (DOAS), Quasar 900 sử dụng phân tích dấu vân tay quang phổ về bầu khí quyển. Những phân tích và sự kiện thời gian thực này có thể được ghi lại thông qua Trình ghi sự kiện tích hợp, cho phép trình phát hiện ghi lại 100 sự kiện gần nhất. Máy dò khí đốt đường dẫn mở Quasar 900 được chứng nhận bởi nhiều cơ quan bên thứ ba, bao gồm FM, ATEX, IECEx và TUV. Những phê duyệt và chứng nhận này đảm bảo cho khách hàng của chúng tôi rằng chúng tôi chỉ mang chất lượng sản phẩm và hiệu suất cao nhất.

Thông số kỹ thuật:

Detection Range

901: 23-66 ft. (7-20 m)

902: 50-132 ft. (15-40 m)

903: 115-330 ft. (35-100 m)

904: 265-660 ft. (80-200 m)

Response Time

3 seconds

Immunity to False Alarm

Not influenced by solar radiation, hydrocarbon flames, and other external IR radiation sources

Spectral Response

2.0-3.0 µm

Sensitivity Range

0-5 LEL.m

Displacement/ Misalignment Tolerance

+/- 0.5°

Minimum Detectable Level

0.15 LEL.m

Temperature Range

-67o to 149oF (-55o to 65oC)

Humidity

Up to 95% non-condensing (withstands up to 100% RH for short periods)

Heated Optics

To eliminate condensation and icing on the window

Warranty

Safety System: 3 years

Flash Source Bulb: 10 years

Power Supply

24 VDC nominal (18-32 VDC)

Power Consumption (peak includes heated optics)

Detector: 250 mA (300 mA Peak)

Source: 250 mA (300 mA Peak)

Warm Up Time

30 seconds for transmitter and receiver

Electrical Connection (specify)

2 x ¾” – 14 NPT conduits or 2 x M25 x 1.5 mm ISO

Electrical Input Protection

According to EN50270

Electromagnetic Compatibility

EMI/RFI protected per NE50270

0-20 mA Current Output

Sink (source option configuration)

  • Maximum Load: 600 at 18-32 VDC
  • Gas Reading: 4-20 mA
  • Normal, Zero Reading: 4 mA
  • Maintenance Call: 3 mA
  • Obscuration/Misalignment/Beam Block: 2 mA
  • Zero Calibration Mode: 1 mA
  • Fault: 0 mA
RS-485 Interface – Modbus Compatible

The RS-485 input/output provides complete data information to a PC and receives control commands from the PC or handheld unit

HART

HART communications on 0-20mA analog current (FSK) – used for maintenance and asset management

Visual Status Indicator

3 color LED: Green – Power On, Yellow – Fault, Red – Alarm

Hazardous Area Approval

ATEX/IECEx

  • Ex d e [ia] ia IIB + H2 T4 Gb
  • Ex tb IIIC T135oC Dc IP66
  • The detector or source units have a combination of approvals. Each is a single enclosure (EExd) with integral, segregated rear terminal section (EExe) and intrinsically safe (EExia) data-port for external in-situ connection to Hand-Held Diagnostic unit

FM/FMC

  • Approved per Class I Div 1 Groups B, C, D, Class II, III Div 1 Groups E, F, G
Performance

Approved per FM6325 and tested by FM per EN60079-29-4

Reliability

Pending per IEC61503 (TUV) per SIL-2 requirements

Enclosure

The source and detector housings are stainless steel 316L with electro polish finish. The circuit boards are conformal coated and protected from mechanical vibrations. The tilt mount is also stainless steel 316L

Dimensions

Detector/Source: 10.5 x 5.1 x 5.1 in. (267 x 130 x 130 mm)

Tilt Mount: 4.7 x 4.7 x 5.5 in. (120 x 120 x 158 mm)

Weight

Detector/Source: 11 lb. (5 Kg)

Tilt Mount: 4.2 lb. (1.9 Kg)

Water and Dust Tight

IP66 and IP68

NEMA 250 6P

Tilt Mount: 4.2 lb. (1.9 Kg)

Environmental

Meets MIL-STD-810C for Humidity, Salt and Fog, Vibration, Mechanical Shock, High and Low Temperature